Dalsa Linea Lite GigE Series User Manual

Linea Lite GigE Series Camera Operational Reference • 105
Acquisition and Transfer Control Category
The Linea Lite GigE Acquisition and Transfer Control category groups parameters used to configure
the optional acquisition modes of the device. These features provide the mechanism to either have
acquisitions coupled to transfers (basic mode) or to decouple acquisitions from both the camera
transfer module and the host transfer module.
Figure 84: CamExpert – Acquisition and Transfer Control Category
Acquisition and Transfer Control Feature Descriptions
Display Name Feature & Values Description Standard
& View
Acquisition Status
Selector
AcquisitionStatusSelector Selects the internal acquisition signal to read using
AcquisitionStatus.
Expert
Acquisition Trigger Wait AcquisitionTriggerWait Device is currently waiting for a trigger to capture one
or more frames.
Acquisition Active AcquisitionActive
Device is currently doing an acquisition of one or more
frames.
Acquisition Status AcquisitionStatus
Reads the state of the internal acquisition signal
selected using the AcquisitionStatusSelector feature.
Expert
Acquisition Mode AcquisitionMode Set the acquisition mode of the device. It defines the
number of frames to capture during an acquisition and
the way the acquisition stops.
Beginner
Single Frame SingleFrame
One frame is captured for each AcquisitionStart
Command. An AcquisitionStop occurs at the end of the
Active Frame.
Multi-Frame MultiFrame A sequence of frames is captured for each
AcquisitionStart Command. The number of frames is
specified by AcquisitionFrameCount feature. An
AcquisitionStop occurs at the end of the Active
Frame(s).
Continuous Continuous
Frames are captured continuously with AcquisitionStart
until stopped with the AcquisitionStop command.

Dalsa Linea Lite GigE Series Specifications

General

Brand	Dalsa
Model	Linea Lite GigE Series
Category	Digital Camera
Language	English