22 • Linea Lite GigE Camera Quick Start Linea Lite GigE Series Camera
Linea Lite GigE Camera Quick
Start
Sapera Software Installation
Note: Installation of Sapera LT and the GigE Vision package requires
administrative privileges; logon to the workstation as an administrator or with an
account that has administrator privileges.
When Linea Lite GigE is used in a Sapera development environment with Sapera LT 8.0 or
later, all GigE Vision support for cameras is automatically installed.
If no Sapera development is required then the Sapera LT SDK is not needed to control the Linea
Lite GigE camera; Sapera runtime with CamExpert provides everything to control the camera.
If Linea Lite GigE will be used in a third party GigE Vision Compliant environment, Sapera or
Sapera runtime is not required; follow the installation instructions of the third party package.
Procedure
• Download and install Sapera LT 8.0 which automatically provides GigE Vision support. When
installing, select the installation for GigE Vision support.
http://www.teledynedalsa.com/imaging/support/downloads/sdks/
Refer to Sapera LT User’s Manual concerning application development with Sapera.
Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to
describe Linea Lite GigE Vision features) is installed with either the Sapera LT
runtime or the Sapera LT development package. If Sapera application development
is required, install Sapera LT (8.0 or later for all firmware support) as described in
the previous section.
To Next Page
Loading...
Need help?
General
