Linea Lite GigE Series Camera Linea Lite GigE Series Overview • 21
GigE Vision Sapera Application Description
Linea Lite GigE cameras are 100% compliant with the GigE
Vision 1.2 specification which defines the communication
interface protocol used by any GigE Vision device. The device
description and capabilities are contained in an XML file. For
more information see:
http://www.machinevisiononline.org/public/articles/index.cfm
?cat=167
Linea Lite GigE cameras implement a superset of the
GenICam™ specification which defines device capabilities.
This description takes the form of an XML device description
file respecting the syntax defined by the GenApi module of
the GenICam™ specification. For more information see
www.genicam.org
.
The Teledyne DALSA GigE Vision Module provides a license free development platform for Teledyne
DALSA GigE hardware or Sapera vision applications. Additionally supported are Sapera GigE Vision
applications for third party hardware with the purchase of a GigE Vision Module license, or the
Sapera processing SDK with a valid license.
The GigE Vision Compliant XML device description file is embedded within Linea Lite GigE firmware
allowing GigE Vision Compliant applications access to camera capabilities and controls immediately
after connection.
Figure 8: GigE Application Architecture
To Next Page
Loading...
Need help?
General
