130 • Operational Reference Linea Lite GigE Series Camera
File Access Control Feature Descriptions
Display Name Feature & Values Description Standard
& View
File Selector FileSelector Selects the file to access. The file types which are
accessible are device-dependent.
Firmware Firmware1 Upload new firmware to the camera which will execute on
the next camera reboot cycle. Select the DeviceReset
feature after the upload completes.
Factory Flat Line Coefficients 1 FlatFieldCoefficients01 Select factory flatfield coefficients1. These are the factory
values when the camera sensor Gain is 1.0.
User Flat Line Coefficients 1 FlatFieldCoefficients1 Select to read (download), write (upload) or delete the
User flatfield coefficients 1.
User Flat Line Coefficients 2 FlatFieldCoefficients2 Select to read (download), write (upload) or delete the
User flatfield coefficients 2.
User Flat Line Coefficients 3 FlatFieldCoefficients3
Select to read (download), write (upload) or delete the
User flatfield coefficients 3.
User Flat Line Coefficients 4 FlatFieldCoefficients4
Select to read (download), write (upload) or delete the
User flatfield coefficients 4.
LUT Luminance 1 LutLuminance1
Select to write (upload) a Look-up-Table file (Sapera .LUT
file) into the camera's internal LUT Luminance 1.
User Defined Saved Image userDefinedSavedImage Upload and download an image in the camera.
Open Source Licenses SoftwareLicenses Open Source Software Licenses
File Operation Selector FileOperationSelector Selects the target operation for the selected file in the
device. This operation is executed when the File Operation
Execute feature is called.
Open Open Select the Open operation - executed by
Close Close Select the Close operation - executed by
Read Read Select the Read operation - executed by
FileOperationExecute.
Write Write
Select the Write operation - executed by
FileOperationExecute.
Delete Delete
Select the Delete operation - executed by
FileOperationExecute.
File Operation Execute FileOperationExecute
Executes the operation selected by File Operation Selector
on the selected file.
File Open Mode FileOpenMode Selects the access mode used to open a file on the device.
Read Read Select READ only open mode.
Write Write Select WRITE only open mode.
File Access Buffer FileAccessBuffer
Defines the intermediate access buffer that allows the
exchange of data between the device file storage and the
File Access Offset FileAccessOffset Controls the mapping offset between the device file
storage and the file access buffer.
File Access Length FileAccessLength
Controls the mapping length between the device file
storage and the file access buffer.
File Operation Status FileOperationStatus Displays the file operation execution status. (RO)
The last file operation has completed successfully.
Failure Failure
The last file operation has completed unsuccessfully for an
File Unavailable FileUnavailable
The last file operation has completed unsuccessfully
because the file is currently unavailable.
File Invalid FileInvalid
The last file operation has completed unsuccessfully
because the selected file in not present in this camera
model.
File Operation Result FileOperationResult Displays the file operation result. For Read or Write
operations, the number of successfully read/written bytes
To Next Page
Loading...
Need help?
General
