Linea Lite GigE Series Camera Troubleshooting • 167
Cameras displayed in blue have a proper NIC IP assigned.
Figure 113: Network Configuration Tool – Proper IP Assigned
Note: The Network Configuration Tool assigns a dynamic IP address, which is lost
on power down. To avoid this issue, assign a persistent IP address to the camera.
Click the ‘Persistent IP Mode’ (shown above) and press the Apply button to assign the IP address.
It will automatically connect to the host PC if the IP address does not conflict with other network IP
addresses. Refer to Persistent IP section for more information.
Note: Assigning two devices the same IP Address will cause conflicts.
To Next Page
Loading...
