Danfoss VLT AutomationDrive FC 360 Design Guide

Design Guide | VLT® AutomationDrive FC 360
5.7 Digital Inputs 29
5.8 Analog Inputs 30
5.9 Pulse Inputs 30
5.10 Digital Outputs 31
5.11 Analog Outputs 31
5.12 Relay Outputs 31
5.13 Control Card, RS485 Serial Communication 32
5.14 Control Card, 24 V DC Output 33
5.15 Control Card, +10 V DC Output 33
5.16 Control Characteristics 33
5.17 Control Card Performance 33
5.18 Exterior and Terminal Dimensions 34
5.18.1 J8 Exterior Dimensions 34
5.18.2 J8 Terminal Dimensions 37
5.18.3 J9 Exterior Dimensions 39
5.18.4 J9 Terminal Dimensions 42
6 Mechanical Installation Considerations
6.1 Storage 44
6.2 Lifting the Unit 44
6.3 Operating Environment 45
6.3.1 Operating Environment Overview 45
6.3.2 Gases 45
6.3.3 Dust 45
6.4 Mounting Configurations 45
6.5 Cooling 46
6.6 Derating 46
6.6.1 Overview of Derating 46
6.6.2 Derating for Low-Speed Operation 47
6.6.3 Derating for Altitude 47
6.6.4 Derating for Ambient Temperature and Switching Frequency 48
7 Electrical Installation Considerations
7.1 Safety Instructions 49
7.2 Wiring Diagram 50
Danfoss A/S © 2024.01 AJ435824192086en-000101 / 130R1295 | iii

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English