¢ Motor control (speed, torque, or process).
l Control algorithms (VVC+, Flux Sensorless, and flux with motor feedback).
8.3.2 Reference Handling
8.3.2.1 Local and Remote Reference
Local reference
The local reference is active when the drive is operated with [Hand On] active. Adjust the reference via the Up key, Down key, Right key
and the [Back] key.
Remote reference
The reference handling system for calculating the remote reference is shown in the Figure 38.
78 | Danfoss A/S © 2024.01 AJ435824192086en-000101 / 130R1295
Design Guide | VLT® AutomationDrive FC 360
To Next Page
Loading...
