Danfoss VLT AutomationDrive FC 360 Design Guide

Design Guide | VLT® AutomationDrive FC 360
9.10.4 Force/Write Multiple Coils (0F hex) 109
9.10.5 Read Holding Registers (03 hex) 110
9.10.6 Preset Single Register (06 hex) 111
9.10.7 Preset Multiple Registers (10 hex) 112
9.11 Danfoss FC Control Profile 113
9.11.1 Control Word According to FC Profile (8-10 Protocol = FC Profile) 113
9.11.2 Status Word According to FC Profile (STW) 116
9.11.3 Bus Speed Reference Value 118
10 Application Examples
10.1 Introduction 120
10.2 AMA 120
10.3 Speed 121
10.4 Start/Stop 124
10.5 External Alarm Reset 125
10.6 Motor Thermistor 125
10.7 Encoder Connection 127
10.8 Encoder Direction 129
10.9 Closed-loop Drive System 129
11 How to Order a Drive
11.1 Drive Configurator 130
11.2 Ordering VLT® AutomationDrive FC 360 Enclosure Size J8–J9 130
11.3 Ordering Accessories and Spare Parts 131
11.4 Ordering Filters and Brake Resistors 132
12 Appendix
12.1 Abbreviations and Symbols 133
12.2 Definitions 136
12.2.1 AC Drive 136
12.2.2 Input 136
12.2.3 Motor 136
12.2.4 References 138
12.2.5 Miscellaneous 138
12.3 Conventions 141
Danfoss A/S © 2024.01 AJ435824192086en-000101 / 130R1295 | vii

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English