To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
What to do if DataCard SD260 Printer USB not detected?
If you receive an error message stating that the USB is not detected, it indicates that the USB installer timed out and a printer was not detected. You should remove the printer driver before re-installing the printer.
What to do if DataCard Printer USB cable is connected before driver installation?
The first printer installed on a PC using a USB connection must be installed from the driver CD or downloaded driver. Remove the driver before re-installing the printer.
Why is the 'Print Sample Card' button not available for my DataCard Printer?
The 'Print Sample Card' button in Printer Properties is enabled when the printer and Card Printer Driver communicate normally.
Why is the PC USB port not communicating with the DataCard SD260 Printer USB port?
Power management on the PC has shut down USB communication.
What to do if the network cable is loose on my DataCard SD260 Printer?
If the network cable is loose, reconnect the data cable to the network port and the printer, ensuring it's securely snapped in. Then, restart the printer.
What to do if the data cable of my DataCard Printer is damaged or frayed?
If the data cable is damaged or frayed, power off the DataCard printer. If you have a spare cable, replace the damaged one. Otherwise, contact your service provider to order a new data cable.
What to do if the cable is loose on my DataCard Printer?
If the cable is loose on your DataCard Printer, reconnect the USB cable to the ports on the PC and the printer. Power the printer off, and then back on. If the PC and printer still do not communicate, restart the PC.
Why does my DataCard Printer have a temporary communication problem?
Temporary communication problems with your DataCard Printer may be due to several factors. Check the following: USB extension cables can cause communication problems. The recommended USB cable is 6-ft. (2 meters) long and rated for USB 2.0 data transmission. If you are using a USB hub, a self-powered hub is recommended.
What to do if I get an error message that the USB is not detected on my DataCard SD260?
If you receive an error message stating that the USB is not detected, it means the USB installer timed out before a printer was detected. Remove the Card Printer Driver from the Device Manager before reinstalling the printer.
What to do if DataCard Printer does not install when the USB cable is connected?
If a previous installation attempt of your DataCard Printer was unsuccessful, the Device Manager might still have an entry for the printer. Before reinstalling, remove the printer entry from the Device Manager.
General| Windows operating systems supported | Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
|---|---|
| Color | Yes |
| Print speed (color) | 200 card/h |
| Product color | Blue, Grey |
Weight and Dimensions| Depth | 391 mm |
|---|---|
| Width | 175 mm |
| Height | 224 mm |
Lists the minimum hardware and operating system specifications for the PC.
Outlines installation methods: Driver CD, Download, Printer Sharing, and Pooling.
Overview of procedures for installing the printer driver.
Step-by-step guide for installing the printer via USB using the installation CD.
Step-by-step guide for installing the printer via network using the installation CD.
Guides on setting up and using the printer over a network with shared access.
Overview of common printer messages and error conditions.
Lists common error messages and provides troubleshooting steps for each.
Step-by-step instructions for uninstalling the XPS Card Printer Driver.
Procedure to identify the source of printer malfunctions.
Common issues encountered during printer installation and their solutions.
Specific troubleshooting steps for USB printer connection problems.
Specific troubleshooting steps for network printer connection problems.
Troubleshooting issues related to printer driver detection and communication.
Troubleshooting steps for when no printing occurs on the card.
Solutions for resolving issues with extraneous data appearing on cards.
Troubleshooting steps for defects in color printing quality.
Solutions for issues resulting in faint or light card printing.
Solutions for issues resulting in overly dark card printing.
Troubleshooting steps for quality issues in monochrome printing.
Common problems and solutions for magnetic stripe encoding and reading.
