Need help?Do you have a question about the DataCard SD260L and is the answer not in the manual?
Details operation of the printer's front panel controls, including buttons and LCD panel.
Instructions for printing a test card to verify printer functionality without external software.
Steps for loading cards, print ribbon, cleaning sleeve, and laminator overlay material.
Steps for printing cards from ID software or other applications.
Guidelines for regular printer cleaning to maintain optimal performance and print quality.
Detailed procedure for cleaning the printhead to resolve printing issues like lines or dirt.
Instructions for using a cleaning card to remove debris from the printer's interior and rollers.
Steps to isolate and resolve basic printer operational problems before contacting support.
Addresses issues preventing successful printer installation, covering USB and network setups.
Solutions for problems encountered during USB printer installation.
Solutions for problems encountered during network printer installation.
Troubleshoots communication issues between the card printer driver and the printer.
Guides on diagnosing and fixing issues related to how cards look after printing.
Diagnoses and resolves issues related to magnetic stripe encoding and reading.
Covers issues that may occur when using the laminator to apply overlay material.
Provides steps to resolve card jams within the printer.
Explains various messages and conditions displayed by the printer and driver.
To Next Page
General
