DataCard SD260L - 109: Print Ribbon Problem; 110: Print Ribbon out or Missing; 111: Card Not Picked; 112: Card Hopper Empty

SD260L/SD360/SD460 Card Printers User’s Guide 63
109: Print ribbon problem
Theprintri bbonisnotmovingproperly.
1. Opentheprinterandremovetheribbon cartridge.
2. Reposition,repair,orreplacetheribbonandadvancetherepairedareaonefullturn.
3. Replacetheribboncartridgeandclosetheprinter.
PresstheU
SERbuttonontheprintertoclearthemessage.OnthePC,clickRetry,orclickCancelto
cancelthecard.
110: Print ribbon out or missing
Theprinterdoesnothaveusableribbon.Tocompletethecurrentcard:
1. Opentheprinterandremovetheribbon cartridge.
2. Installanewribbonandcleaningroller.
3. Replacethecartridgeandclosetheprinter.
PresstheU
SERbuttonontheprintertoclearthemessage.OnthePC,clickOK,orclickCancelto
cancelthecard.
HINTS&TIPS
Usedribbonhasnegativeimagesofprinteddata.Tokeepthedataconfidential,followyour
companypolicytodiscardusedribbon.
111: Card not picked
Theprinterdidnotpickacard.Tocompletethecurrentcard:
Forprinterswithaninputhopper,opentheinputhopper,addorrepositioncards,andclosethe
hopper.
Forprinterswithsinglecardfeed,pushthecardinuntiltheprinterpicksit.
PresstheU
SERbuttonontheprintertoclearthemessage.OnthePC,clickOK,orclickCancelto
cancelthecard.
112: Card hopper empty
Theprinterdidnotdetectcardsintheinputhopper.
Addcardstotheinputhopper.
PresstheU
SERbuttonontheprintertoclearthemessage.OnthePC,clickOK,orclickCancelto
cancelthecard.