DataCard SD260L - 106: Magstripe Data Not Found; 107: Magstripe Read Data Error; 108: Magstripe Read no Data

62 Troubleshooting
106: Magstripe data not found
Theprinterdidnotfindmagneticstripedataoncard.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprintersettings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheU
SERbuttonontheprintertoclearthemessag e.OnthePC,clickRetry ,orclickCancel
tocancelthecard.
HINTS&TIPS
 Thecardmightnotmatchprintersettingsorthedatasent.
 Askthesystemadministratortoverifythatthecard,thedata,andtheprintersettingsmatch.
107: Magstripe read data error
Theprinterfailedtoreadthemagneticstripedatafromthecard.Thecardwillbecanceled.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprintersettings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheU
SERbuttonontheprinter,orclickOKonthePCtoclearthemessage.
HINTS&TIPS
 Thedatamightuseadifferentformatthanthecurrentprintersetting.
 Askthesystemadministratortoverifythatthecard,data,andprintersettingsmatch.
108: Magstripe read no data
Theprinterdidnotfindanymagneticstripedataoncard.Thecardwillbecanceled.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprintersettings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheU
SERbuttonontheprinter,orclickOKonthePCtoclearthemessage.
HINTS&TIPS
 Thecardmighthavebeenturnedthewrongway.
 Thecardmightnothaveamagneticstripe.