DataCard SD260L - Outside the Laminator; Laminator Back and Left Side

A-2 SD460 Laminating System
Outside the Laminator
Usethefollowinginformationtobecomefami liarwiththelaminator.
Laminator Back and Left Side
PrinterMountingPins Thepinsaligntheprinterwiththelaminator.
PrinterMountingLock Thelocksecurestheprintertothelaminator.
LaminatorStatusLight Thelightshowsthestatusofthelaminator.Referto
“LaminatorStatusLight”onpage A‐3.
CardEntryArea Thecardentryareareceivesthecardfromtheprinter
and
placesitintopositionforlaminating.
RejectCardTray Unfinishedcardsorcardsnotprocessedproperlyareplacedin
therejectcardtray.
LaminatorPower
Connection
Thepowerconnectionprovidesaplug‐inconnectorforthe
laminatorpowersupply.
CardEntry
Area
RejectCard
Tray
LaminatorStatus
Light
Printer
MountingPin
LaminatorPower
Connection
PrinterMounting
Pins
PrinterMounting
Lock