DataCard SD260L - 103: Printer Problem; 104: Critical Problem; 105: Magstripe Data Error

SD260L/SD360/SD460 Card Printers User’s Guide 61
103: Printer problem
Theprinterhadanerror.Thecardwillbecanceled.
1. PresstheprinterP
OWERbuttontopowerofftheprinter.
2. PresstheP
OWERbuttonagaintopowerontheprinter.
ClickOKonthePCtoclearthemessage.
104: Critical problem
Theprinterhadaseriouserror.Thecardwillbecanceled.
1. PresstheprinterPOWERbuttontopowerofftheprinter.
2. Requestservice.
Thesystemmustremainpoweredoff.
ClickOKonthePCtoclearthemessage.
105: Magstripe data error
Theprinterfailedtoverifythatthecorrectmagneticstripedatawaswrittenonthecard.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprintersettings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheU
SERbuttonontheprintertoclearthemessage.OnthePC,clickRetry,orclickCancelto
cancelthecard.
HINTS&TIPS
 Thecardmighthavebeenturnedthewrongway.
 Thecardmightnothaveamagneticstripe.