DataCard SD260L - Load Laminator Overlay Material

A-8 SD460 Laminating System
Load Laminator Overlay Material
Loadtheov erlaymaterialinonelaminatorcartridgeatatime.
1. Openthelaminatoraccessdoor.
2. RemovetheL1(green)laminatorcartridgefrom
thelaminator.Placethecartridgeonasmooth
levelsurfaceforloading.
3. Pushthereleaselatch(a)andopenthegateon
thelaminatorcartridge(b).
4. Removebothusedspoolsfromthecartridge(if
present).
TheL1(green)andL2(orange)cartridgesfitonlyintheirassignedlocationsinside
thelaminator.Theyarenotinterchangeable.