DataCard SD260L - Printer Top and Front

4 About the Printer
Printer Top and Front
Cover Openthecovertoaccesstheprintheadandribbon.
LatchButton Pushthelatchbuttontoreleasethecoverandopentheprinter.
CoverRidges Pressdownontheridgeswhenclosingthecovertomakesure
thatitlatchesproperlyonbothsides.
RibbonCartridge
Handle
Usethehandletoremovethe
printribboncartridgefromthe
printer.
CardInputHopper Theinputhopperloadscardstoprint.Thehopperholdsupto
100cards(0.030in.or0.762mmthickness).
FrontPanel Thefrontpanelletsyouworkwiththeprinter.Itincludesthe
U
SERbutton,thestatuslights,thepowerbutton,andtheLCD
panelwithnavigationkeys.
OutputHopper Theoutputhopperholdsupto25completedcards.
Cover
LatchBut ton
CardInput
Hopper
FrontPanel
Output
Hopper
CoverRidges
RibbonCartridgeHandle