GLOSSARY
130
SAFERY LASER SCANNER
Teach-in
A feature that scans the configuration in order to process and
use the results for:
• Dust settings - to choose the best Dust Immunity level
according to device’s environment.
• Zone Configurator - to draw automatically Warning or Safety
Zone.
Note: This feature is available only in the Online mode.
Upload
An operation to transfer the configuration from the GUI to the
Device.
Warning Zone
This is the area around the Safety Zone; the device can signal a
warning lamp or siren if it detects an object in this area.
Zone Set
This is an area (zone) that is controlled by the Laser Sentinel.
More than one zone can be defined and therefore switched (set)
by a combination of inputs.
NAME DESCRIPTION
To Next Page
Loading...
