Datalogic Magellan 83 Product Reference Guide

6-46 Magellan
®
8300/8400
Scale Enforced Zero Return
This feature enables/disables the enforced zero return of the scale. Three
settings are available for this feature:
•Disable
• Scale Must Return to Zero Weight Within Two Minutes — Scale
will require re-zeroing if a non-zero weight is left on for more than
two minutes or if the scale is below zero.
• Scale Must Return to Zero Weight Between Weight Requests — Re-
zeroing is required if weight doesn't return to zero between weight
requests from the POS, plus scale will require re-zeroing if a non-
zero weight is left on for more than two minutes or if the scale is
below zero.
• Non-Zero for Two Minutes — Re-zeroing is required if weight does
not return to zero within two minutes.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan. The strategy is
to select the lowest possible filter level needed that allows normal
scale operation.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE ENFORCED ZERO RETURN = DISABLE

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English