To Next Page

To Previous Page

6-310 Magellan

8300/8400

I 2 of 5 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for I 2 of 5.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

I 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH

I 2 OF 5 LENGTH CONTROL = FIXED-LENGTH

NOTE

You must now set the features I 2 of 5 Length 1 and I 2 of 5 Length 2.

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83