Datalogic Magellan 83 Product Reference Guide

Code 39 Enable
Product Reference Guide 6-283
Code 39 Length 1
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode (see
Code 39 Length Control).
Length includes the barcode’s check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET CODE 39 LENGTH 1 below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that rep-
resent the desired label length. The selectable range for this option is
001 to 050. Pad all single and double digit numbers with leading
zeroes to yield a three-digit entry (001-050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODE 39 LENGTH 1

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English