Single Cable RS-232 Options
Product Reference Guide 6-143
Single Cable Pacesetter Plus Enable
Enables/disables the scanner’s ability to send Pacesetter Plus information
as trailers to UPC/EAN label data.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SINGLE CABLE PACESETTER PLUS = DISABLE
SINGLE CABLE PACESETTER PLUS = ENABLE
To Next Page
Loading...
Need help?
General
