To Next Page

To Previous Page

6-322 Magellan

8300/8400

Standard 2 of 5 Length 1

Length 1 is the minimum label length if in variable length mode, or the

first fixed length if in fixed length mode (see

Standard 2 of 5 Length Con-

trol). Length includes the barcode’s check and data characters.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan the bar code,

SET STANDARD 2 OF 5 LENGTH 1 below.

You’ll need to cover any unused bar codes on this and the facing

page to ensure that the scanner reads only the bar code you intend

to scan.

3. Scan the appropriate digits from the keypad in

Appendix C that rep-

resent the desired label length. The selectable range for this option is

001 to 050. Pad all single and double digit numbers with leading

zeroes to yield a three-digit entry (001-050).

4. Complete the programming sequence by scanning the SWITCH

bar code.

SET STANDARD 2 OF 5 LENGTH 1

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83