To Next Page

To Previous Page

6-282 Magellan

8300/8400

Code 39 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 39.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

CODE 39 LENGTH CONTROL = VARIABLE-LENGTH

CODE 39 LENGTH CONTROL = FIXED-LENGTH

NOTE

You must now set the features Code 39 Length 1 and Code 39 Length 2.

When using variable length stitching, it is important to enable Code 39

Check Character Calculation to prevent misreads.

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83