To Next Page

To Previous Page

Code 128 Enable

Product Reference Guide 6-297

Code 128 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 128.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

CODE 128 LENGTH CONTROL = VARIABLE-LENGTH

CODE 128 LENGTH CONTROL = FIXED-LENGTH

NOTE

You must now set the features Code 128 Length 1 and Code 128 Length

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83