Datalogic Magellan 83 Product Reference Guide

6-340 Magellan
®
8300/8400
Codabar Correlation
This feature enables/disables character correlation for Codabar.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
CODABAR CORRELATION = DISABLE
CODABAR CORRELATION = ENABLE

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English