Datalogic Magellan 83 Product Reference Guide

6-312 Magellan
®
8300/8400
I 2 of 5 Length 2
Length 2 is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode (see
I 2 of 5 Length Control).
Length includes the barcode’s check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET I 2 of 5 LENGTH 2 below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that rep-
resent the desired label length. A setting of 000 will ignore this
length (only one fixed length), otherwise, the selectable range for
this option is 002 to 050, even numbers only. Pad all single and
double digit numbers with leading zeroes to yield a three-digit entry
(002-050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET I 2 of 5 LENGTH 2

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English