To Next Page

To Previous Page

6-286 Magellan

8300/8400

Code 39 Stitching

Enables/disables stitching for Code 39 labels. When parts of a Code 39

bar code are presented to the scanner with this feature enabled, the bar

code parts will be assembled by the scanner’s software, and the data will be

decoded if all bar code proofing requirements are met.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

Complete the programming sequence by scanning the SWITCH bar

code.

CODE 39 STITCHING = DISABLE

CODE 39 STITCHING = ENABLE

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83