6-246 Magellan
®
8300/8400
Addons
Add-ons (or supplemental characters) are commonly added to the end of
UPC/EAN bar codes. The scanner will read the add-ons if they are
enabled and in the field of view. Three add-on types are supported: 2-
digit, 5-digit and Code 128 add-ons. Supported options are:
None —
This option directs the scanner to ignore add-on portion of a
UPC/EAN bar code but still read the main portion of the bar code.
2 Digits —
The scanner will optionally read 2-digit add-ons with the
UPC/EAN label.
5 Digits —
The scanner will optionally read 5-digit add-ons with the
UPC/EAN label.
Code 128 Add-on —
The scanner will optionally read Code 128 add-
ons with the UPC/EAN label.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option on this and the
following page. You’ll need to cover any unused bar codes on facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
NOTE
Contact Customer Support for advanced programming of
optional and conditional add-ons.
To Next Page
Loading...
Need help?
General
