Datalogic Magellan 83 Product Reference Guide

6-56 Magellan
®
8300/8400
Scale Diagnostics Mode Enable
Enables/disables the ability for the operator to initiate scale diagnostics.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the two bar codes below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE DIAGNOSTICS MODE = DISABLE
SCALE DIAGNOSTICS MODE = ENABLE

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English