EAN-8 Enable
Product Reference Guide 6-209
EAN-8 Stitch Unlike Label Halves
When enabled, this allows the scanner the ability to stitch two EAN-8
label halves together that may contain differing characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-8 STITCH UNLIKE LABEL HALVES = DISABLE
EAN-8 STITCH UNLIKE LABEL HALVES = ENABLE
To Next Page
Loading...
Need help?
General
