To Next Page

To Previous Page

Code 128 Enable

Product Reference Guide 6-293

Code 128 Enable

Enables/disables

the ability of the scanner to decode Code 128 labels.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

CODE 128 = DISABLE

CODE 128 = ENABLE

1. Exception: The Code 128 symbology is always enabled with regard to scanning/reading the spe-

cial C128 programming bar codes provided in this manual.

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83