Datalogic Magellan 83 Product Reference Guide

6-342 Magellan
®
8300/8400
Codabar Minimum Reads
Specifies the minimum number of consecutive times a Codabar label must
be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on the
following pages. You’ll need to cover any unused bar codes on facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
CODABAR MINIMUM READS = 1
CODABAR MINIMUM READS = 2

Datalogic Magellan 83 Specifications

General

Brand	Datalogic
Model	Magellan 83
Category	Barcode Reader
Language	English