6-234 Magellan
®
8300/8400
UPC/EAN Stitch Exact Label Halves
When enabled, this allows the scanner the ability to stitch exact UPC-A /
EAN-13 label haves with no overlapping characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC/EAN STITCH EXACT LABEL HALVES = DISABLE
UPC/EAN STITCH EXACT LABEL HALVES = ENABLE
To Next Page
Loading...
Need help?
General
