2-6 Magellan
®
8300/8400
• Develop a smooth fluid motion during scanning, sharing work
equally between hands.
• Use the entire hand for grasping and lifting items.
• Since the scanner reads labels on all four sides plus the top and
bottom, there is no need to turn a bar code toward either of the
scanner windows.
• Develop efficient scanning motions, not necessarily faster hand
movements. Simply slide the item across the scanner’s horizontal
window with as little orientation motion as necessary.
• Leave items in an upright position; do not lift and tilt.
• Learn how the scanner functions and where the scanning area is
located.
• Do not favor either the vertical or horizontal window; slide items
across the scanner in their natural orientations on the checkstand
as much as possible.
Site Preparation Overview
Consider the following factors before installing the scanner or scanner/
scale and its optional Remote Scale Display.
Ventilation Requirements —
The scanner operates without the use of
a ventilation fan. As long as there is adequate convective air flow and no
major heat producing equipment in close proximity, the unit’s housing
provides adequate heat dissipation. The air temperature in the checkstand
around the scanner must not exceed 104°F (40°C).
Service Access Requirements —
Routine operations such as ‘zero-
ing’ and calibration do not require removal of the scanner from the check-
stand or disassembly of the product. The installer should plan service
access for the AC/DC Power Supply and cables.
To Next Page
Loading...
Need help?
General
