To Next Page

To Previous Page

Product Reference Guide G-9

Code 128

• Prefix must be an ASCII character '#'.

• Label length excluding prefix character must meet requirements

imposed by the main scanner's fixed or variable label length control

for this symbology type.

• Function characters may be transmitted as a hexadecimal value 8x.

Where x correlates to function characters 1 thru 4 as follows:

• x80 = function code 1

• x81 = function code 2

• x82 = function code 3

• x83 = function code 4

• For Code 128 programming labels the format is of the general form

'#/82nnnnn/r ' - /82 is hexadecimal 82 and /r is carriage return.

• Example: '#Code_128.Test'.

MSI/Plessey

• Check character must be included in label data.

• Label length including check character and excluding prefix charac-

ter must meet requirements imposed by the main scanner's fixed or

variable label length control for this symbology type.

• Prefix must be an ASCII character '@'.

• Example: '@144769254'.

Code 93

• Prefix must be an ASCII character '&'.

• Label length excluding prefix character must meet requirements

imposed by the main scanner's fixed or variable label length control

for this symbology type.

• Example: '&Code93-test'.

Datalogic Magellan 83 Product Reference Guide

Other manuals for Datalogic Magellan 83