Getting Started
8
PowerScan
TM
PBT7100 Cordless
Figure 3. Labeling and Nomenclature
Optional: Linking the Reader to a PC in Server Mode
A reader can optionally be linked in server mode to a Bluetooth-enabled PC with the se-
rial port profile.
To do this, follow these steps:
1. Ensure the PC or terminal can network with Bluetooth devices and that it is powered on.
2. Scan the “Link to a PC” barcode below.
3. On the PC, scan for network devices.
4. Select the “Datalogic PBT7100 Reader.” Make sure “Secure Connection” is disabled.
5. Select “connect” on the PC to link the reader to the PC.
This illustration shows label placement ONLY.
For actual regulatory, patent and other applicable
information, view the labels on the product intself,
or call your nearest sales or service office.
Scan
Window
Trigger
Indicator
LEDs
S/N and Laser Safety Label
Speaker
Port
Battery Pack
Battery Latch
Antenna
Link Bar Code
Scanner
Latch
Link
Button
Green LED
Amber LED
Scanner
Base Station
Link to a PC in Server Mode
To Next Page
Loading...
Need help?
General
