Datalogic PowerScan PBT7100 - BT Beeper Features; ACK Beep

BT Features
340 PowerScan
TM
PBT7100 Cordless
BT Beeper Features
Several options are available to configure beeper behavior for BT operation.
ACK Beep
Enables/disables the ACK beep indication. The ACK beep occurs in reponse to the label
acknowledgement (HACK) from the Base Station. The HACK signal is sent according
to the settings made for
BT Address Stamping on page 364.
ENTER/EXIT PROGRAMMING MODE
ACK Beep = Disable
ACK Beep = Enable
DEFAULT