BT Features
346
PowerScan
TM
PBT7100 Cordless
BT Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per
second) when the handheld goes out of range. This is especially useful in instances where
the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the feature Sleep Mode Timeout on page 23, must be dis-
abled. If the reader is asleep, there is no way for it to know where it is relative to the Base
Station because communication is not active between the devices.
ENTER/EXIT PROGRAMMING MODE
BT Leash Alarm = Disabled
BT Leash Alarm = 1 Second
BT Leash Alarm = 2 Seconds
BT Leash Alarm = 3 Seconds
BT Leash Alarm = 4 Seconds
To Next Page
Loading...
Need help?
General
