BT Features
362
PowerScan
TM
PBT7100 Cordless
BT Security Mode
This feature enables/disables authentication and encryption of the BT link. Use the fea-
ture, BT Pin Code on page 359, to specify the pin code used to authenticate the BT
Link.
NOTE
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default enabled setting, the devices must
only be relinked. If the Automatic Configuration Update is set to the disabled
setting, the Security Mode setting must also be updated in the Base Station
using Aladdin. After the Base Station has been updated the devices must be
relinked.
ENTER/EXIT PROGRAMMING MODE
BT Security Mode = Disable
BT Security Mode = Enable
To Next Page
Loading...
Need help?
General
