Edit Configuration
11
4.2.3 DATA LOGGING
The Data Logging page is subdivided into smaller sections.
Select the required section with the mouse.
4.2.3.1 CONFIGURATION
4.2.3.2 OPTIONS
Setting
D
escription
Only log when engine
is running
= The module will log data regardless of engine running state.
= The module will only log data when the engine is running.
Log to USB drive
= The module will log data to the modules internal memory.
= The module will log data to an external USB device connect to the USB host
socket on the module.
Keep oldest data
= When the logging memory is full, the module will overwrite the oldest data first
with the new data.
= When the logging memory is full, the module will stop recording new data.
Select the instrument / item to
be logged. Twenty (20)
selection points are possible.
Select the logging interval
of the data.
To Next Page
Loading...
Need help?
General
