Deep Sea Electronics Plc DSE8810 Software Manual

Scada
142
5.16.8 MODULE PIN
NOTE: If the PIN is lost of forgotten, it will not be possible to access the module!
Allows a PIN (Personal Identification Number) to be set in the controller. This PIN must be entered to either
access the front panel configuration editor or before a configuration file can be sent to the controller from the
PC software.
Enter the desired PIN
number and reconfirm.
Click to set the
PIN number in
the module.

Deep Sea Electronics Plc DSE8810 Specifications

General

Brand	Deep Sea Electronics Plc
Model	DSE8810
Category	Controller
Language	English