Scada
124
5.6 VIRTUAL LEDS
Shows the state of the virtual LEDs. These LEDs are not fitted to the module or expansion modules, they are
not physical LEDs. They are provided to show status and appear only in the SCADA section of the
configuration suite, or can be read by third party PLC or Building Management Systems (for example) using
the modbus RTU protocol.
5.7 BUS
Shows the module measurements of the BUS
Shows if the
Virtual LED is
active or not
Shows what the Virtual LED is
configured for (shows the LED
number if not configured)
To Next Page
Loading...
