Deep Sea Electronics Plc DSE8810 Software Manual

Edit Configuration
71
4.8.3 CAN ALARMS
The CAN alarms page is subdivided into smaller sections.
Select the required section with the mouse.
4.8.3.1 CAN DATA FAIL
4.8.3.2 DM1 SIGNALS
DM1 signals are messages from the CAN ECU. The following parameters allows configuration of how the
DSE module responds to these messages.
Configuration of the CAN data fail
alarm providing protection against
the failure of the engine ECU data
link.

Deep Sea Electronics Plc DSE8810 Specifications

General

Brand	Deep Sea Electronics Plc
Model	DSE8810
Category	Controller
Language	English