Edit Configuration
77
4.8.9 INLET TEMPERATURE
Provides inlet temperature alarms when the module is used in conjunction with electronic (ECU) engines that
support the reading of inlet temperature
Click and drag to change the
setting.
Type the value
or click the up
and down
arrows to
change the
settings
Click to enable or
disable the option.
The relevant values
below will appear
greyed out if the
alarm is disabled.
If a supported ECU engine is
not selected on the Application
page of the configuration, the
whole page is greyed out and
cannot be enabled.
To Next Page
Loading...
Need help?
General
