Deep Sea Electronics Plc DSE8810 Software Manual

Edit Configuration
18
4.4.3 FUEL LEVEL
The fuel level page is subdivided into smaller sections.
Select the required section with the mouse.
4.4.3.1 FUEL LEVEL ALARM
Click to edit the
‘sensor curve’. See
section entitled
Editing the sensor
curve
.
Select the
sensor type
Type the value or click the up and
down arrows to change the settings
Click to enable or
disable the alarms.
The relevant values
below will appear
greyed out if the
alarm is disabled.
Select the type of
alarm required.
For details of these,
see the section
entitled Alarm
Types elsewhere in
this document.
Click and drag to alter the time delay

Deep Sea Electronics Plc DSE8810 Specifications

General

Brand	Deep Sea Electronics Plc
Model	DSE8810
Category	Controller
Language	English