Deep Sea Electronics Plc DSE8810

Edit Configuration
73
4.8.5 GAS ENGINE OPTIONS
Controls the amount
of time that the Gas
Choke output will be
active during the
starting sequence.
Controls the amount
of time between
energising the Gas
Ignition and
energising the Fuel
output. Used in the
starting sequence to
purge old gas from
the engine.
Controls the amount of time
between de-energising the
Fuel output and de-
energising the Gas Ignition
output. Used in the
stopping sequence to
purge unburnt gas from the
engine before it is stopped.
For these timers to have
any meaning, outputs are
required for Gas Choke,
Gas Ignition and Fuel.