Deep Sea Electronics Plc DSE8810

Edit Configuration
19
4.4.3.2 FUEL LEVEL CONTROL
Fuel
L
evel
O
ptions
Fuel Pump Control If enabled, allows the module to control an external fuel pump to transfer fuel from a bulk
tank to the generator set’s day tank.
Fuel Usage Alarm Provides an alarm to monitor the usage of the generator set’s fuel.
There are two settings, one to monitor fuel usage when the set is running and another to
monitor the fuel usage when the set is stopped.
These alarms are provided to check for fuel leakage problems or potential fuel theft.
Hint
: Set an
output to “Fuel
pump control’.
This can be used
to transfer fuel
from a bulk tank to
the day tank, for
example.
Click and drag
to change the
settings