Deif PPU 300 - Page 37

•
5. Select the new position by pressing OK .
6. To confirm the new order, select Write .
• Or you can return to the previous screen by pressing Back .
Set the displayed range
1. Highlight the view you want to change by pressing Up or Down , and press OK .
2. Highlight the element that you want to change by pressing Up
or Down .
3. Select Scale to change the range.
•
• Press Up or Down to highlight the minimum or maximum value.
• Press OK to open the virtual keyboard to change the value.
4. To confirm the range, select Write .
• To restore the default range, select Clear
Clear
.
• To cancel your changes and return to the previous screen press Back .
OPERATOR'S MANUAL 4189341099G UK Page 37 of 130