Deif PPU 300 - Page 64

Selecting a function
1. For digital function(s), select Digital
Digital
.
2. For analogue function(s), select Analogue
Analogue
.
INFO
Analogue function(s) are shown by default when you open the page.
3. Highlight a category or group, by pressing Up or Down .
4. Select the highlighted category or group, by pressing OK
.
• The display unit will show the function list, or another function group.
• If another function group is shown, repeat step 3 to open the required group.
5. Highlight a function, by pressing Up
or Down .
6. Enable the highlighted function by pressing OK .
• Selected function(s) are shown with a solid box.
•
INFO
You can add further functions to the same input, provided they have the same unit of measure.
7. To clear all the Enabled function(s), select Clear
Clear
.
OPERATOR'S MANUAL 4189341099G UK Page 64 of 130