Dell S3048-ON User Manual

Scenario Output
scenario, a corresponding error message is
displayed.
--------------------------------------------------------------
---
|Hop| OIF IP |Proto| Forwarding Code |Source Network/
Mask|
--------------------------------------------------------------
---
0 4.4.4.5 --> Destination
-1 4.4.4.4 PIM
6.6.6.0/24
-2 20.20.20.2 PIM 6.6.6.0/24
-3 10.10.10.1 PIM Wrong interface 6.6.6.0/24
--------------------------------------------------------------
----
R1>mtrace 6.6.6.6 4.4.4.5
Type Ctrl-C to abort.
Querying reverse path for source 6.6.6.6 to destination
4.4.4.5 via RPF
From source (?) to destination (?)
--------------------------------------------------------------
---
|Hop| OIF IP |Proto| Forwarding Code |Source Network/
Mask|
--------------------------------------------------------------
---
0 4.4.4.5 --> Destination
-1 4.4.4.4 PIM
6.6.6.0/24
-2 20.20.20.2 PIM 6.6.6.0/24
-3 10.10.10.1 PIM RPF Interface 6.6.6.0/24
--------------------------------------------------------------
----
Multicast Features
527

Dell S3048-ON Specifications

General

Rack Units	1U
Form Factor	Rack-mountable
Input Voltage	100-240V AC
Power Supply	2 hot-swappable power supplies
Management	CLI, Web, SNMP
Product Type	Switch
MAC Address Table Size	32K entries
Jumbo Frame Support	Yes
Latency	< 3 microseconds
Ports	48 x 1GbE RJ45, 4 x 10GbE SFP+